BW-B2D thermal protector fuse with terminal temperature limited
controller switch fuse 250V 5A to 16A 0-150C
- H20,H21 series thermostat’s Principle and structure
H20,H21serial universal and enhanced protectors with large metal
casing are composed of the thermal conductive metal casing,
bimetallic parts welded with silver alloy contact point, conductive
bracket, insulation fixation stand, fixed contact strip and heat
resistance cable. In case of abnormal operation, along with the
increase of the environment temperature to the set value, the
bimetallic parts perform quick action, open the contact point, and
disconnect the circuit. When the device is cooled to the
temperature for safe operation, the contact point will
automatically closes and recover normal operation.
- H20,H21series thermal protector’s Specification
- Switch type: normally closed, normally opened.
- Operating Voltage / Current: AC250V / 5A; AC125V / 8A
- Operating Temperature: 40~150℃ (one step for every 5°C)
- Standard Tolerance: ±3°C / ±5°C / ±7°C
- Reset temperature: operating temperature decrease by 15-45°C
- Contact Closure resistance: ≤50mΩ
- Insulation resistance: ≥100mΩ
- Electric strength: AC1500V/1min free from phenomena of break down
and flashover.
- Service life: 10000 times
| Electrical Rating | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 16A |
| Open temperature | (30~150)±5°C; 5°C a step |
| Reset temperature | 2/3 of the action temperature with tolerance of ±15°C. Reset
temperature can also be provided according to customers'
requirement. |
| Life times | 10000 times |
| Contact Closure resistance: | ≤50mΩ |
| Insulation resistance: | ≥100mΩ |
| Electric strength: | - AC1500V/1min free from phenomena of break down and flashover.
|
| UL File no | E487478 |
| CQC certificate no | CQC16002142880 |
| TUV certificate no | B160592241002 |
- H20,H21series thermal protector’s Dimension
| Model | Case | Length(mm) | width(mm) | High(mm) | Vol.&Current | Lead wire |
| H20 | Plastic | 18.5 | 8 | 4 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 10A | #20 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| H21 | Metal | 18.5 | 7.3 | 3.8 |
| H21 | Metal | 20 | 8 | 4 | AC250V 20A | #16 3135 |
| BH-A1D | Metal | 15 | 6.6 | 3.2 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V | #20 3135, #22 3266,#22 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| BH-B2D | Plastic | 15 | 7.1 | 3.8 |
| BH-TB02B-B8D | Plastic | 15 | 5.2 | 2.4 | DC-12V max 4A; DC-24V max 3A; AC-125V max 3A; AC-250V max 2A | 3266-AWG24#, 3135-AWG24# or nickel strip normally, length is 70 mm
or according to customer’s require |
- H20,H21series temperature protector’s Application
H20,H21series is applicable to chargeable battery, ballast,
massager, micro motor, transformer, electric tools, heat electric
appliance and instrument etc.
A thermal fuse is a cutoff which uses a one-time fusible link. Unlike a thermal switch which may automatically reset itself when
the temperature drops, the thermal fuse is more like an electrical
fuse: a single-use device that cannot be reset and must be replaced
when it fails or is triggered.
